European version of efficient crusher maintenance and common troubleshooting solutions

1. During the use of the crusher, there should be fixed personnel responsible for the care. The operator must have a certain level of technology. Before the crusher is installed, the relevant personnel must be given technical training to understand the principle and performance of the machine and be familiar with the operating procedures.
2. In order to make the machine work properly, the “safety operation and maintenance system” of the equipment should be formulated to ensure the long-term safe operation of the machine. At the same time, it must have the necessary maintenance tools and grease and accessories.
3. During the use of the fine crusher, the wear level of the hammerhead and the liner must be checked every 6-8 hours, and the wearer should be replaced in time to prevent wear and abrasion and cause machine damage.
Common faults, troubleshooting
If found a fine crusher (European high efficiency crusher) vibration abnormalities:
1, indicating that the material is too large, you can check the feed size.
2, uneven wear, indicating that the rotor needs to be replaced.
3, rotor imbalance, need to adjust, replace when serious wear.
4, If the foundation is not properly handled, check the anchor bolts and reinforce them.
If found fine crusher (European version of efficient crusher) bearing heat:
1, Explain that the bearing is short of oil and it is necessary to refuel in time. Of course, too much refueling will cause the bearing to generate heat. When refueling, it is necessary to check the oil level.
2, bearing damage, to replace the bearing.
3, the upper cover is too tight, it is necessary to adjust the bolts, moderate elasticity is appropriate.
If you find that the size of the fine crusher (European high efficiency crusher) is too large:
1, explain the rotor wear, need to idle or replace the rotor.
2, too large feed particle size will affect the size of the material.
If you find that the crusher belt is flipped:
1, the belt wear, need to replace the triangle belt.
2,Because of belt assembly problems, the pulleys need to be adjusted on the same plane.
3, we must pay attention to the quality of the triangle belt itself.

Get Support Or Price